Hyundai 2006 Azera Owner's Manual page 249

6
DO-IT-YOURSELF MAINTENANCE
12
3. Replace with a new wiper blade.
Alternatively, you can replace the wind-
shield wiper blade as follows.
G080B03TG
1. Turn the ignition switch "ON" and place
the windshield wiper switch to the "LO"
position. Turn the ignition switch "OFF"
when the windshield wiper is in the fully
up position. The windshield wiper will
stop as illustrated.
2. Replace the wiper blade as described
in the section of the driver's side re-
placement.
NOTE:
Remove any dirt or ice on the windshield
before turning on the wipers. Damage to
the wiper blade rubber and windshield
could occur.
FILLING THE WASHER
RESERVOIR
G090A02NF-AAT
G080B04TG
The washer fluid reservoir supplies fluid to
the windshield washer system.
A good quality washer fluid should be
used to fill the washer reservoir. The fluid
level should be checked more frequently
during bad weather or whenever the
washer system is in more frequent use.
The capacity of the washer reservoir is 3.2
U.S. quarts (4.0 liters).
G090A01TG