Hyundai 2006 Azera Owner's Manual page 118

1
FEATURES OF YOUR HYUNDAI
104
1. Press and hold the
than 6 seconds. When the compass
memory is cleared a "C" will appear in
the display.
2. To calibrate the compass, drive the
vehicle in 2 complete circles at less than
5 MPH (8 Km/h).
®
Integrated HomeLink
trol System
®
The HomeLink Wireless Control System
provides a convenient way to replace up to
three hand-held radio-frequency (RF)
transmitters with a single built-in device.
This innovative feature will learn the radio
frequency codes of most current transmit-
ters to operate devices such as gate op-
erators, garage door openers, entry door
locks, security systems, even home light-
ing. Both standard and rolling code-
equipped transmitters can be programmed
by following the outlined procedures. Ad-
®
ditional HomeLink information can be
found at: www.homelink.com or by calling
1-800-355-3515.
button for more
!
CAUTION:
Before programming HomeLink
garage door opener or gate operator,
make sure that people and objects are
out of the way of the device to prevent
potential harm or damage. Do not use
Wireless Con-
HomeLink
that lacks the safety stop and reverse
features as required by U.S. federal
safety standards (this includes any ga-
rage door opener model manufactured
before April 1, 1982). A garage door that
cannot detect an object - signaling the
door to stop and reverse - does not meet
current U.S. federal safety standards.
Using a garage door opener without these
features increases the risk of serious
injury or death.
Retain the original transmitter of the RF
device you are programming for use in
other vehicles as well as for future
HomeLink
gested that upon the sale of the vehicle, the
programmed HomeLink
erased for security purposes.
® to a
®
with any garage door opener
® programming. It is also sug-
® buttons be
®
Programming HomeLink
NOTE:
o When programming a garage door
opener, it is advised to park the ve-
hicle outside of the garage.
o It is recommended that a new battery
be placed in the hand-held transmit-
ter of the device being programmed
to HomeLink ® for quicker training and
accurate transmission of the radio-
frequency signal.
o Some vehicles may require the igni-
tion switch to be turned to the second
(or "accessories") position for pro-
gramming and/or operation of
HomeLink.
o In the event that there are still pro-
gramming difficulties or questions
after following the programming steps
listed below, contact HomeLink
www.homelink.com or 1-800-355-
3515.
®
at: