Hummer 2008 H3 Owner's Manual page 239

Tire and Loading Information Label
Label Example
A vehicle specific Tire and Loading Information
label is attached to the vehicle's center pillar
(B-pillar). With the driver's door open, you will
find the label attached below the door latch post.
The Tire and Loading Information label shows the
number of occupant seating positions (A), and the
maximum vehicle capacity weight (B) in kilograms
and pounds.
The Tire and Loading Information label also
shows the size of your vehicle's original equipment
tires (C) and the recommended cold tire inflation
pressures (D). For more information on tires and
inflation see Tires on page 5-54 and Inflation - Tire
Pressure on page 5-62.
There is also important information on the
Certification/Tire label. It tells you the Gross
Vehicle Weight Rating (GVWR) and the Gross
Axle Weight Rating (GAWR) for the front and rear
axles. See "Certification/Tire Label" later in this
section.
Steps for Determining Correct Load Limit
Locate the statement "The combined weight of
1.
occupants and cargo should never exceed
XXX kg or XXX lbs" on your vehicle's placard.
Determine the combined weight of the driver
2.
and passengers that will be riding in your
vehicle.
Subtract the combined weight of the driver
3.
and passengers from XXX kg or XXX lbs.
4-43