Compass - GMC 2010 Terrain Owner's Manual

The vehicle may have a compass
display on the Driver Information
Center (DIC). The compass
receives its heading and other
information from Global Positioning
System (GPS) antenna, StabiliTrak,
and vehicle speed information.
Avoid covering the GPS antenna for
long periods of time with objects
that may interfere with the antenna's
ability to receive a satellite signal.
See
for the location of the
vehicle's antennas. The compass
system is designed to operate for a
certain number of miles or degrees
of turn before needing a signal from
the GPS satellites. When the
compass display shows CAL, drive
the vehicle for a short distance in
an open area where it can receive a
GPS signal. The compass system
will automatically determine when
GPS signal is restored and provide
a heading again. See
information on the messages that
may be displayed for the compass.
The infotainment system controls,
located on the instrument panel, are
used to access the time and date
settings through the menu system.
See
information about how to use the
menu system.
1. Turn the infotainment
system ON.
2. Press the CONFIG button and
select Time and Date Settings.
3. Select Set Time or Set Date.
4. Turn the MENU/SEL knob to
adjust the highlighted value.
5. Press the MENU/SEL knob
to select the next value.
for more
6. To save the time or date
and return to the Time and
Date Settings menu, press
the
or press the MENU/SEL knob
after adjusting the minutes
or year.
for
1. Turn the infotainment
system ON.
2. Press the CONFIG button and
select Time and Date Settings.
3. Highlight 12/24 Hour Format.
4. Press the MENU/SEL knob to
select the 12 hour or 24 hour
display format.
BACK button at any time