Rocking Your Vehicle To Get It Out; Recovery Hooks - GMC 2008 Yukon Owner's Manual

Hide thumbs Also See for 2008 Yukon:
Table of Contents

Advertisement

Rocking Your Vehicle to Get It Out

First, turn the steering wheel left and right to clear
the area around the front wheels. For four-wheel-drive
vehicles, shift into Four-Wheel High or Four-Wheel Low.
For vehicles with StabiliTrak
part of the system off. See StabiliTrak
page 4-6. Then shift back and forth between
REVERSE (R) and a forward gear, spinning the wheels
as little as possible. To prevent transmission wear,
wait until the wheels stop spinning before shifting gears.
Release the accelerator pedal while you shift, and
press lightly on the accelerator pedal when the
transmission is in gear. By slowly spinning the wheels in
the forward and reverse directions, you will cause a
rocking motion that could free your vehicle. If that does
not get your vehicle out after a few tries, it might
need to be towed out. Or, you can use recovery hooks,
if your vehicle has them. If your vehicle does need to
be towed out, see Towing Your Vehicle on page 4-45.
4-34
®
, turn the traction control
®
System on

Recovery Hooks

CAUTION:
{
These hooks, when used, are under a lot of
force. Always pull the vehicle straight out.
Never pull on the hooks at a sideways angle.
The hooks could break off and you or others
could be injured from the chain or cable
snapping back.

Advertisement

Table of Contents
loading

This manual is also suitable for:

2008 yukon xl

Table of Contents