GMC 2008 Sierra 1500 Pickup Owner's Manual page 372

(C) DOT (Department of Transportation)
The Department of Transportation (DOT) code
indicates that the tire is in compliance with the
U.S. Department of Transportation Motor Vehicle
Safety Standards.
(D) Tire Identification Number (TIN)
letters and numbers following DOT code are the
Tire Identification Number (TIN). The TIN shows
the manufacturer and plant code, tire size, and
date the tire was manufactured. The TIN is molded
onto both sides of the tire, although only one side
may have the date of manufacture.
(E) Tire Ply Material
:
of plies in the sidewall and under the tread.
(F) Uniform Tire Quality Grading (UTQG)
Tire manufacturers are required to grade tires
based on three performance factors: treadwear,
traction, and temperature resistance. For more
information, see Uniform Tire Quality Grading
on page 5-76.
(G) Maximum Cold Inflation Load Limit
Maximum load that can be carried and the
maximum pressure needed to support that load.
For information on recommended tire pressure
see Inflation - Tire Pressure on page 5-65
and Loading Your Vehicle on page 4-34.
5-60
:
The
:
The type of cord and number
:
:
Light Truck (LT-Metric) Tire
(A) Tire Size The tire size code is a combination
:
of letters and numbers used to define a particular
tire's width, height, aspect ratio, construction
type, and service description. See the "Tire Size"
illustration later in this section for more detail.
(B) TPC Spec (Tire Performance Criteria
Specification) Original equipment tires designed
:
to GM's specific tire performance criteria have
a TPC specification code molded onto the sidewall.
GM's TPC specifications meet or exceed all
federal safety guidelines.