Table of Contents
Advertisement
3. Press the pushbutton below the
auto volume label on the radio
display.
4. Press the pushbutton under the
desired setting (Off, Low, Medium
or High) to select the level of
compensation. For the Bose
system, the settings are On and
Off.
5. The compensation will be set once
the display times out after 10
seconds.
Setting the Time (excluding
Navigation Radio)
Your vehicle has an analog clock as
well as the digital radio clock. The
digital radio clock display is disabled
at the factory.
To Enable the Radio Clock Display:
1. Press the
(Clock) button. Or, if
equipped, press the MENU button
until the clock label is displayed;
and then press the pushbutton
located under the clock label until
the clock menu appears.
2. Press the pushbutton under the
forward arrow label until the
default clock and date settings
menu appears.
D
T
3. Press the pushbutton under the
displayed status of either On or
Off. The Off status indicates the
radio clock display is enabled
and RADIO CLOCK ON will be
displayed. The On status indicates
the radio clock display is disabled
and RADIO CLOCK OFF will be
displayed.
To Set the Time:
1. Press the
(Clock) button. Or, if
equipped, press the MENU button
until the clock option is displayed;
and then press the pushbutton
located under the clock option
label. The HR, MIN, MM, DD,
YYYY labels will appear on the
display.
2. Press the pushbutton under any of
the labels to be changed.
3. Press the pushbutton again or the
FWD button to increase the
numbers. Press the REV button to
decrease the numbers. Rotating
the Tune knob also will increase or
decrease the selected label.
4. Press the Clock or MENU button
again to set the currently
displayed time and date.
S
MP3 Capability
Your audio system has MP3 playing
capability. A CD-R containing MP3
audio tracks will play automatically
when inserted into the CD player.
Portable Audio Player
A portable audio player can be
connected to the auxiliary input jack
located on the radio. When
connected, the radio automatically
begins playing audio from the player
over the vehicle speakers.
Radio Data System
When you tune to a Radio Data
System (RDS) station, the station
name and call letters will appear on
the display. RDS stations may also
provide the time of day, a program
type for current programming and
the name of the program being
broadcast.
RDS features are available for use
only on FM stations that broadcast
RDS information. RDS relies on
receiving specific information from
these stations and will work only
when the information is available.
Advertisement
Table of Contents
