GMC 2003 Yukon Owner's Manual page 212

If your vehicle is not equipped with the DIC steering
wheel buttons you will not have any of these
personalization options except for DISPLAY
LANGUAGE. See DISPLAY LANGUAGE later in this
section for more information.
•
AUTOMATIC LOCKING
•
AUTOMATIC UNLOCKING
•
REMOTE LOCK FEEDBACK
•
ALARM WARNING TYPE
•
REMOTE UNLOCK FEEDBACK
•
HEADLAMPS ON AT EXIT
•
PERIMETER LIGHTING
•
SEAT POSITION RECALL
•
EASY EXIT DRIVER SEAT
•
CURB VIEW ASSIST
•
DISPLAY LANGUAGE
•
DISPLAY UNITS (ENG/MET)
The default options for the above features were set
when your vehicle left the factory. The default options
are noted in the text following, but may have been
changed from their default state since then. The driver's
preferences are recalled by pressing the unlock
button on the remote keyless entry transmitter or by
pressing the appropriate memory button 1 or 2 located
on the driver's door.
3-58
Alarm Warning Type
Press the personalization button until ALARM
WARNING TYPE appears in the display. To select your
personalization for alarm warning type, press the
select button while ALARM WARNING TYPE is
displayed on the DIC. Pressing the select button will
scroll through the following choices:
ALARM WARNING: BOTH (default): The headlamps
will flash and the horn will chirp when the alarm is
active.
ALARM WARNING: OFF: There will be no alarm
warning on activation.
ALARM WARNING: HORN: The horn will chirp when
the alarm is active.
ALARM WARNING: LAMPS: The headlamps will flash
when the alarm is active.
Choose one of the four options and press the
personalization button while it is displayed on the DIC to
select it and move on to the next feature. For more
information on alarm warning type, see Content
Theft-Deterrent on page 2-16 .