Windshield Wiper Blade Replacement - GMC 2000 Jimmy Owner's Manual

Taillamps
1. Open the endgate/liftgate.
3. Pull the assembly away from the vehicle.
4. Turn the socket counterclockwise to remove it.
Push the tab in while you turn the
socket counterclockwise.
5. Holding the base of the bulb, pull the bulb straight
out of the socket.
6. Push the new bulb straight into the socket until
it clicks.
2. Remove the two screws
from the lamp assembly.
7. Put the socket into the assembly and turn the socket
clockwise until it locks in place.
8. Install the lamp assembly. Install and tighten
the screws.
9. Close the endgate/liftgate.
Windshield Wiper
Blade Replacement
Windshield wiper blades should be inspected at least
twice a year for wear or cracking. See "Wiper Blade
Check" in Section 7 of this manual under Part B "Owner
Checks and Services" for more information.
See "Normal Maintenance Replacement Parts" in the
Index for the proper type of replacement blade.
NOTICE:
Use care when removing or installing a blade
assembly. Accidental bumping can cause the arm
to fall back and strike the windshield.
6-39