Ford 2009 Flex Owner's Manual page 143

3. Within three seconds press the
Transmitter.
4. A tone will be heard when the activation is complete.
5. Repeat this procedure for another Integrated Keyhead Transmitter if
desired.
Deactivating the memory feature
To deactivate this feature:
1. Press and hold either the 1 or 2 control on the driver's door for five
seconds. (A tone will be heard after 1
is done) continue to hold until a second tone is heard after five seconds.
2. Within three seconds press the
Transmitter.
3. A tone will be heard when the deactivation is complete.
4. Repeat this procedure for another Integrated Keyhead Transmitter if
desired.
Replacing the battery
The Integrated Keyhead Transmitter uses one coin type three-volt
lithium battery CR2032 or equivalent.
To replace the battery:
1. Twist a thin coin in the slot of the
IKT near the key ring in order to
remove the battery cover.
2. Do not wipe off any grease on the
battery terminals on the back
surface of the circuit board.
3. Remove the old battery.
Note: Please refer to local
regulations when disposing of
transmitter batteries.
2009 Flex (471)
Owners Guide, 2nd Printing
USA (fus)
Locks and Security
control on the Integrated Keyhead
1 ⁄ seconds when the memory store
2
control on the Integrated Keyhead
143