Infant Car Seat Mode; Using The Infant Car Seat Receivers - Britax B-CLEVER User Manual

Infant Car Seat Mode

• All infant car seats MUST be installed rear facing.
• Always remove the infant car seat receivers when not in use.
Failure to do so may result in injury.
IMPORTANT:
• For infant car seats compatibility refer to us.britax.com/faqs/.
• Always secure child in harness when infant car seat is in use with
the stroller.

Using the Infant Car Seat Receivers

Attaching the Infant Car Seat Receivers
NOTE: Attach the adapters as shown in the image.
1. Lock the parking brake.
2. Align the receiver with the mount on
the inside frame of the stroller, then
push down until a click is heard.
Pull up on the receiver to ensure it is
secure.
3. Repeat for the other side.
CLICK
15