20.7 To Remove Water System Electronic Controller Board
CN-OLP1
1. Remove all the connectors from the Electronic Controller.
CN-HT
CN-PUMP1
CN-FLWSEN
CN-TH1
CN-TH3
Electronic Controller Board
2. Disconnect all lead wires of
G01 (Green), G02 (Green), G03 (Green)
AC2-N2 (White), HT1-L3 (Red) &
AC2-L3 (Black), Data (Red), AC1-N (White)
AC1-L3 (Black) and ACL3 (Black)
217