M41-80 Hardware Maintenance Manual
1090 Touchpad module
For access, remove these FRUs in order:
• "1010 Keyboard" on page 33
• "1020 Base cover" on page 35
• "1030 Battery pack" on page 38
• "1040 Hard disk drive" on page 39
• "1050 PCI Express Mini Card for wireless LAN" on page 41
• "1070 System board" on page 45
Figure 9. Removal steps of touchpad module
Remove the screws 1. Then remove the touchpad module in the direction
shown by arrow 2.
48
Step
Screw (quantity)
M2.0 x 2.0 mm, Phillips-head, nylok-coated (3)
1
TP module to Up
2
Color
Silver
Torque
1.85 (1.7-2.0) kgf*cm