Samsung 3 Series User Manual page 74

Other Information
Issues
The picture won't display in
full screen.
A Mode Not Supported
message appears.
There is a plastic smell from
the product.
The product Signal
Information is unavailable in
the Self Diagnosis menu.
The product is tilted to the
side.
The channel menu is greyed
out (unavailable).
Your settings are lost after
5 minutes or every time the
product is turned off.
Solutions and Explanations
HD channels will have black bars on either side of the screen when displaying up
scaled SD (4:3) contents.
Black bars will appear on the top and bottom of the screen when you watch movies
that have aspect ratios different from your product.
Adjust the picture size options on your external device or the product to full screen.
Check the supported resolution of the product, and adjust the external device's
output resolution accordingly. Refer to the resolution settings of this manual.
This smell is normal and will dissipate over time.
This function is only available for digital channels the product receives from an Aerial
/ RF / Coax connection.
Remove the base stand from the product and reassemble it.
The Channel menu is only available when you select the product source.
If the product is in the Store Demo
every 5 minutes. Change the settings from
using the Setup procedure. Select
MENU → System → Setup.
English - 74
mode, it will reset audio and picture settings
Store Demo mode to
TV in the Source using your remote, and go to
Home Use mode