Samsung 3 Series User Manual page 40

Basic Features
Speaker Settings
MENU → Sound → Speaker Settings
●
Auto Volume
Because each station has its own broadcasting conditions, the volume may fluctuate each time you change the
channel. This feature automatically adjusts the volume of a channel by lowering the sound output when the
modulation signal is high or by raising the sound output when the modulation signal is low.
To use the volume control of a connected source device, set
"
control of the connected source device may not be applied if
●
TV Installation Type
Specify the TV's installation type. Choose between
Additional Settings
(digital channels only)
●
DTV Audio Level (MPEG
of the signals received during a digital TV broadcast) to a desired level.
According to the type of broadcast signal, MPEG / HE-AAC can be adjusted between -10dB and 0dB.
"
To increase or decrease the volume, adjust between the range 0 and -10 respectively.
"
●
HDMI Audio Format (PCM
connected to the TV's HDMI port.
●
Dolby Digital Comp (Line
signal (i.e. MPEG Audio, HE-AAC, ATV Sound).
Select Line to obtain dynamic sound, and RF to reduce the difference between loud and soft sounds at night
"
time.
Line: Set the output level for signals greater or less than -31dB (reference) to either -20dB or -31dB.
RF: Set the output level for signals greater or less than -20dB (reference) to either -10dB or -20dB.
Reset Sound
MENU → Sound → Reset Sound
Reset all sound settings to the factory defaults.
Selecting the Sound Modet
When you set to Dual fg, the current sound mode is displayed on the screen.
A2 Stereo
NICAM Stereo
If the Stereo signal is weak and an automatic switching, occurs, then switch to the Mono.
"
Only activated in stereo sound signal.
"
Only available when the input Source is set to TV.
"
/ HE-AAC): This function allows you to reduce the disparity of a voice signal (which is one
/ Bitstream) : Sets the audio input signal format suitable for the external device
/ RF): This function minimises signal disparity between a dolby digital signal and a voice
Audio Type
Mono
Stereo
Dual
Mono
Stereo
Dual
Auto Volume
Auto Volume
Wall Mount and Stand to optimise the TV's sound automatically.
Dual
f-g
Mono
Stereo  Mono
Dual  Dual
f g
Mono
Mono  Stereo
Mono  Dual
f
 Dual
g 
English - 40
to Off. A change to the volume
is set to Normal or Night.
Default
Automatic change
Dual
f
Automatic change
Dual
f