Intel Pentium NR110 User Manual page 6

NR110 Motherboard
On board EIDE:
•
2x PCI IDE ports supporting up to 4 devices
•
Support ATA-33/66/100, PIO up to mode 4
On board I/O:
•
Low Pin Count (LPC) 3.3V interface between FWH and ICH2
•
2 serial ports - DB9 (16550 UART).
•
1 Parallel Port - DB25 with ECP/EPP support.
•
1 Floppy port with 1.2MB, 1.44MB and 2.88MB support.
•
1 PS/2 mouse connector, 1 PS/2 keyboard connector.
•
3 fan output headers.
•
4 USB Ports: 2 ports with RJ-45/USB connector in back panel, 2 ports with 2X5 header for
front panel connection.
BIOS:
•
Plug & Play BIOS (AMI).
•
2 Mb Firmware Hub
•
ACPI v2.0 – WfM 2.0 – SMBIOS v2.3 – DMI v2.1 – PC2001.
•
Auto detect for: CPU Speed – AGP 4X – ATA-100.
•
Wake-on PS/2 (KB, Mouse) & USB devices.
•
Rapid Boot support
•
WOL, ASF support
•
Power management: ACPI S3, S4 support
Additional Features:
•
Case intrusion header
•
Thermal sensor & CPU monitoring.
•
NIC with integrated MBA boot (complete WOL support)
•
BIOS recovery & Boot-Block overwrite via jumper.
•
Hardware Monitor Capability (SMSC LPC47M192).
Expansion Slots:
•
1 AGP Slot (2X/4X mode).
•
3 PCI Slots (including 1 shared PCI/CNR Slot)
Other:
•
Front panel I/O 2X9 header, key pin 14.
•
On-board buzzer.
2