Setting The Time - Chevrolet 2008 Impala Owner's Manual

Setting the Time

Without Date Display
AM/FM Base Radio with a Single CD Player
This type of radio has a
time. You can set the time by following these steps:
H
1. Press the button until the hour begins flashing on
display. Press this button a second time and the
minutes begin flashing on display.
2. While either the hour or the minutes are flashing,
f
turn the (tune) knob, located on the upper right
side of the radio, clockwise or counterclockwise
to increase or decrease the time. Instead of using
the tune knob, you can also press the SEEK arrows,
\ FWD (forward), or
to adjust the time.
H
3. Press the button again until the clock display
stops flashing to set the currently displayed time;
otherwise, the flashing stops after five seconds and
the current time displayed is automatically set.
To change the time default setting from 12 hour
H
to 24 hour, press the
pushbutton located under the forward arrow label.
H
(clock) button for setting the
s REV (reverse) buttons
button and then the
Once the times 12H and 24H are displayed, press the
pushbutton located under the desired option to
select the default. Press the
the selected default, or let the screen time out.
With Date Display
Single CD (MP3) Player
This type of radio has a
time and date.
To set the time and date, follow these instructions:
1. Turn the radio on.
H
2. Press the button and the HR, MIN, MM, DD,
YYYY (hour, minute, month, day, and year) displays.
3. Press the pushbutton located under any one of the
labels that you want to change. Every time the
pushbutton is pressed again, the time or the date if
selected, increases by one.
•
Another way to increase the time or date, is to
press the right SEEK arrow or
•
To decrease, press the left SEEK arrow or
s REV button. You can also turn the
knob, located on the upper right side of the radio,
to adjust the selected setting.
H
button again to apply
H
(clock) button for setting the
\ FWD button.
f
(tune)
3-67