Table of Contents
Advertisement
DHCP
Type:
Select Disable to disable this Router to distribute IP address. Select Server to enable this
Router to distribute IP addresses (DHCP server). And the following field will be activated for
you to enter this starting IP address.
Start IP address:
Specify the starting IP address of the IP address pool. Default Start IP: 192.168.0.100.
End IP address:
Specify the ending IP address of the IP address pool. Default End IP: 192.168.0.250.
Lease Time:
Specify the time duration for which the settings will be in effect. Default: 86400 seconds.
802.1d Spanning Tree:
Default: Disable.
LLTD:
Default: Disable.
IGMP Proxy:
Default: Disable.
UPnP:
UPuP is architecture for pervasive peer-to-peer network connectivity of PCs and intelligent
devices or appliances, particularly within the home. UPnP builds on Internet standards and
technologies, such as TCP/IP, HTTP, and XML, to enable these devices automatically
connect with one another and work together to make networking – particularly home
networking – possible for more people. Default: Disable. Router Advertisement: Default:
Disable.
PPPoE Relay:
Default: Disable.
DNS Proxy:
Enable the DNS Proxy that will relay users'/clients' DNS requests to a real DNS server IP
address. Users no need to specify real DNS server IP address. Default: Enabled.
50
Advertisement
Table of Contents
