Floor Stand C 32/40 - Loewe Floor Stand C Installation Instructions Manual

7
8
b1
9
10
12 12
34857_000_Floor_Stand_C32_C40_26_08_10_GB_F_E.indd 12 34857_000_Floor_Stand_C32_C40_26_08_10_GB_F_E.indd 12
L
b2
c3 c4
c1 c2
c1 c2
Installation

Floor Stand C 32/40

Insert two adapters into the openings at the bottom of the TV set
(Figure 7, arrows L, R). Ensure that the adapters do not twist.
R
Use the provided screws (M4x12) for fi xing the adapters. Turn the
screws (Figure 8, arrows b1, b2) in and tighten them with the wrench
(T20) (approximately 2 Nm).
Take the tubular support frame clamp. Mount this on the previously
installed adapter as shown in Figure 9. When mounting the tubular
support frame clamp, ensure that it meshes uniformly in both adap-
ters.
Use the provided screws (M4x10) for fi xing the tubular support frame
clamp. Turn the screws (Figure 10, arrows c1, c2, c3, c4) in and tigh-
ten them with the wrench (T20) (approximately 2 Nm).
Place the fl oor stand and the TV set on the fl oor.
Connect the connecting cables and replace the cable connection
cover on the TV set.
Note.
You can also lay the cables in a fabric hose since it looks more
elegant. The fabric hose is not included in the fl oor stand delivery
package. This is available in the desired length from your dealer or
from our after sales service.
Cable hose, black: Article number: 31947 004.
Cable hose, silver: Article number: 31947 005.
13.09.2010 08:30:52 13.09.2010 08:30:52