ActionTec MyWirelessTV 2 User Manual page 6

SELECT button saves the setting. And you can reset the receiver by holding the MENU
button for more than five (5) seconds and then releasing the button.
Note: You can access the GUI menu when the receiver has connected to the
transmitter or when the receiver has not paired with any transmitter.
Receiver Rear Panel
5V DC / 2A
Power Port. The 5V DC / 2A power port is used to connect the Receiver to a power

source.
HDMI Out to TV Port. The HDMI Out to TV port is used, via an HDMI cable, to connect

the Receiver to an HDMI-ready display, such as a high-definition TV.
IR Ext Port. The IR Ext port is used to connect the IR Receiver cable, used to extend

the range of the source device's remote control (in conjunction with the IR Blaster cable
connected to the Transmitter).
Note: The use of the IR Receiver Extension Cable is optional.
HDMI Out to TV
4
IR Ext.