Back-Up Lamps - Chevrolet 2006 Cobalt Owner's Manual

Back-Up Lamps

To replace a back-up lamp bulb, do the following:
1. Open the trunk. See Trunk on page 2-10 for more
information.
2. Locate the back-up lamp bulb assembly in the
trunk lid.
5-52
3. Remove the bulb socket by turning it
counterclockwise.
On vehicles that have a back-up lamp cover, first
remove it by depressing the tab at the top.
4. Pull out the old bulb.
5. Install a new bulb.
6. Reinstall the bulb socket by aligning the tabs and
turning it clockwise to secure.