Advertisement
Contents
Connections
0 The wireless LAN (Wi-Fi) settings of this unit can also be configured from a PC or
tablet that supports wireless LAN connection.
1. Press and hold the ZONE2 SOURCE and TUNER PRESET CH + buttons on
the main unit for at least 3 seconds when the power of the unit is on.
2. Connect the wireless LAN of the PC or tablet used to "Marantz SR5013" when
the message "Connect your Wi-Fi device to Wi-Fi network called "Marantz
SR5013"." appears in the display.
3. Start up the browser and enter "192.168.1.16/Settings/" in the URL.
4. Use the browser to enter the settings, select "Connect" and then exit the
settings.
0 The Default key of this unit is fixed at "1". Set Default key of the router to "1" to use.
Front panel
Display
Playback
Settings
Settings
Configure the IP address.
If you are using a broadband router (DHCP function), the information
0
required for network connection such as the IP address will be
automatically configured since the DHCP function is set to "On" in the
default settings of this unit.
Set up the IP Address, Subnet Mask, Default Gateway and DNS server
0
information only when assigning a fixed IP address or when connecting
to a network without DHCP function.
203
Rear panel
Tips
Network/Settings
DHCP
Off
-IP Address
000.000.000.000
-Subnet Mask
000.000.000.000
-Default Gateway
000.000.000.000
-DNS
000.000.000.000
Save
Cancel
Configures the network settings automatically or manually
Remote
Index
Appendix
Advertisement
