Outboard Motor Disposal Requirements; Emergency Equipment; Emission Control Information - Yamaha F200 Owner's Manual

Hide thumbs Also See for F200:
Table of Contents

Advertisement

face may be scuffed lightly before applying
anti-fouling paint, but do not remove the orig-
inal paint. Removal of the original paint will in-
crease the rate of corrosion.
ECM02411
NOTICE
Anti-fouling paint for fiberglass and wood
may contain materials, such as copper,
graphite, and tin, that can cause corrosion
if applied to aluminum boats and outboard
motor components. Never apply these
types of paint to your outboard motor be-
cause rapid corrosion damage could oc-
cur.
Sacrificial anodes are attached to the out-
board motor to provide corrosion protection
and must never be painted.
Sacrificial anodes made from a different ma-
terial may be necessary for maximum corro-
sion protection due to your local water
conditions. Please consult your Yamaha
dealer.
ECM02421
NOTICE
Painted sacrificial anodes will not provide
corrosion protection.
EMU40302
Outboard motor disposal re-
quirements
Never illegally discard (dump) the outboard
motor. Yamaha recommends consulting the
dealer about discarding the outboard motor.
EMU36353

Emergency equipment

Keep the following items onboard in case
there is trouble with the outboard motor.
 A tool kit with assorted screwdrivers, pliers,
wrenches (including metric sizes), and
electrical tape.
 Waterproof flashlight with extra batteries.
Specifications and requirements
 An extra engine shut-off cord (lanyard) with
clip.
 Spare parts, such as an extra set of spark
plugs.
Consult your Yamaha dealer for details.
EMU25223

Emission control information

EMU25232
This engine conforms to U.S. Environmental
Protection Agency (EPA) regulations for ma-
rine SI engines. See the label affixed to your
engine for details.
EMU31563
Approval label of emission control certifi-
cate
This label is attached at the location shown.
New Technology; (4-stroke) MFI
1. Approval label location
1
EMISSION CONTROL INFORMATION
THIS ENGINE CONFORMS TO
EXHAUST REGULATIONS FOR SI MARINE ENGINES. REFER TO
THE OWNER'S MANUAL FOR MAINTENANCE SPECIFICATIONS
AND ADJUSTMENTS. MEETS U.S. EPA EVAP STANDARDS USING
CERTIFIED COMPONENTS.
FAMILY :
FELs(HC+NOx / CO) :
/
g/kW-hr DISPLACEMENT :
IDLE SPEED :
±
rpm IN NEUTRAL
SPARK PLUG :
SPARK PLUG GAP (mm) :
VALVE LASH (mm)
IN :
YAMAHA MOTOR CO.,LTD.
ZMU08179
MFI
CALIFORNIA AND U.S. EPA
MAX POWER :
kW
liters
FUEL : GASOLINE
EX :
ZMU06894
21

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Lf200F225F250Lf250

Table of Contents