Specifications And Requirements; Specifications - Yamaha F200 Owner's Manual

Specifications and requirements

EMU40501

Specifications

TIP:
"(SUS)" indicates that the specification is for
the outboard motor when it is equipped with
a stainless steel propeller.
EMU2821V
Dimension and weight:
Overall length:
868 mm (34.2 in)
Overall width:
634 mm (25.0 in)
Overall height X:
1829 mm (72.0 in)
Motor transom height X:
643 mm (25.3 in)
Dry weight (SUS) X:
283 kg (624 lb)
Performance:
Full throttle operating range:
5000–6000 r/min
Rated power:
F200A 147.1 kW (200 HP)
F225A 165.5 kW (225 HP)
F250A 183.9 kW (250 HP)
LF200A 147.1 kW (200 HP)
LF250A 183.9 kW (250 HP)
Idle speed (in neutral):
600–700 r/min
Power unit:
Type:
4-stroke DOHC V6 24 valves
Total displacement:
3352 cm³ (204.5 c.i.)
Bore × stroke:
94.0 × 80.5 mm (3.70 × 3.17 in)
Ignition system:
TCI
Spark plug (NGK):
LFR6A-11
14
Spark plug gap:
1.0–1.1 mm (0.039–0.043 in)
Steering system:
Remote steering
Starting system:
Electric starter
Starting carburetion system:
Fuel injection
Valve clearance IN (cold engine):
0.17–0.24 mm (0.0067–0.0094 in)
Valve clearance EX (cold engine):
0.31–0.38 mm (0.0122–0.0150 in)
Battery rating (CCA/SAE):
512–1150 A
Battery rating (MCA/ABYC):
675–1370 A
Battery rating (RC/SAE):
124 minutes
Battery rating (CCA/EN):
510–1080 A
Battery rating (20HR/IEC):
80 Ah
Maximum generator output:
44 A
Lower unit:
Gear shift positions:
Forward-neutral-reverse
Gear ratio:
2.00 (30/15)
Trim and tilt system:
Power trim and tilt
Propeller mark:
F200A M/T
F225A M/T
F250A M/T
LF200A ML/TL
LF250A ML/TL