Table of Contents
Advertisement
Specific Safety Rules
1.
Follow DOT guidelines for
installation and use.
2.
Do not exceed 350 lb. capacity,
evenly distributed. Be aware of
dynamic loading! Sudden load
movement may briefly create excess
load causing product failure.
3.
Secure load before moving.
4.
Tie warning flag to the end
of extended loads.
5.
Turn vehicle's ignition OFF, set parking
brake, and chock wheels before
installing, loading, or unloading.
6.
Use as intended only.
7.
Inspect before use; do not use
if parts loose or damaged.
8.
Wear ANSI-approved safety goggles
and heavy-duty work gloves during
installation, loading, and unloading.
Item 69650
SAVE THESE INSTRUCTIONS.
For technical questions, please call 1-888-866-5797.
9.
Maintain labels and nameplates
on the Extender. These carry
important safety information. If
unreadable or missing, contact
Harbor Freight Tools for a replacement.
10. Keep Extender clean and dry.
11. This product is not a toy. Keep
it out of reach of children.
12. Make sure to secure load with ropes,
and/or tie-downs before transporting.
13. Load heaviest items toward
the center of the Extender.
14. Only use Extender with a properly
installed Class III 2 inch hitch
receiver capable of supporting
the Extender and its load.
15. The warnings, cautions, and instructions
discussed in this instruction manual
cannot cover all possible conditions
and situations that may occur. It must
be understood by the operator that
common sense and caution are factors
which cannot be built into this product,
but must be supplied by the operator.
Page 3
Advertisement
Table of Contents
