Table of Contents
Advertisement
AVR210
AVR110/210/310/510, AVR3000/4000/5000
2. Possible blown line fuse; inspect and replace if necessary: When line fuse FU981 is blown in the AVR
series, the Amber Standby Indicator will still light, but when unit is switched ON, the unit will go into protection.
(Red indicator)
a) Remove (14) Phillips screws holding the top cover to the receiver; remove the cover.
b) Line fuse FU981 is located at the rear, on the vertically mounted Standby PCB close to the connector
where the main AC power cord enters the receiver. Long-nosed pliers or similar tool may be used to
remove it. Connectors nearby it may have to be unplugged to access the fuse.
c) See chart below for proper replacement fuse:
MODEL
AVR110/210
AVR310
AVR510
AVR3000
AVR4000
AVR5000
d) Replace any connectors that were disconnected, replace the top cover; test the unit
NOTE: If line fuse FU981 blows again after a short period, with no speaker loads connected, problem is
another, more serious issue not covered in this bulletin.
All manuals and user guides at all-guides.com
DESCRIPTION
5A Slo-Blo 5x20mm 125V
6.3A Slo-Blo 5x20mm 125V
7A Slo-Blo 5x20mm 125V
2.5A Slo-Blo 5x20mm 250V
3.15A Slo-Blo 5x20mm 250V
4A Slo-Blo 5x20mm 250V
H/K PART#
J5502250320X
A091-0013-0
J5502270320X
G65025225114
J5503331330X
J5502240320X
17
harman/kardon
2
Hide quick links:
Advertisement
Table of Contents
