Table of Contents
Advertisement
C
Connecting to an AV amplifier (receiver) having a Dolby Surround (Pro
Logic) decoder and 3 to 6 speakers
You can enjoy the Dolby Surround effects only when playing Dolby Surround audio or multi-
channel audio (Dolby Digital) discs.
If your amplifier (receiver) has L and R audio input jacks only, use
(receiver) has a digital input jack, use
.
C-2
CD/DVD player
DIGITAL OUT
LINE OUT
S VIDEO
COMPONENT VIDEO OUT
OUT
PCM/DTS/
DOLBY DIGITAL
COAXIAL
R-AUDIO-L
VIDEO
Y
P
B
P
R
C-2
Stereo
Coaxial digital cord
audio cord (not
(not supplied)
DIGITAL OUT
supplied)
PCM/DTS/
DOLBY DIGITAL
COAXIAL
or
to DIGITAL OUT
(COAXIAL)
(white)
to coaxial digital input
[Speakers]
Amplifier (receiver) with Dolby
Surround decoder
Rear (L)
Rear (R)
Subwoofer
Center
l: Signal flow
Note
When connecting 6 speakers, replace the monaural
rear speaker with a center speaker, 2 rear speakers
and a subwoofer.
Step 5: Connecting the Power Cord
Plug the player and TV power cords into an AC outlet.
Step 6: Quick Setup
Follow the steps below to make the minimum number of basic adjustments for using the player.
To skip an adjustment, press >. To return to the previous adjustment, press ..
ENTER
1
Turn on the TV.
2
Press [/1.
3
Switch the input selector on your
TV so that the signal from the
player appears on the TV screen.
"Press [ENTER] to run QUICK SETUP"
appears at the bottom of the screen. If this
message does not appear, select
"QUICK" under "SETUP" in the Control
Bar to run Quick Setup (page 50).
4
Press ENTER without inserting a
disc.
The Setup Display for selecting the
language used in the on-screen display
appears.
C-1
. If your amplifier
C-1
LINE OUT
(white)
(red)
R-AUDIO-L
VIDEO
to LINE OUT L/R (AUDIO)
(red)
to audio input
[Speakers]
Front (R)
Front (L)
Rear (mono)
,continued
21
LANGUAGE SETUP
OSD:
ENGLISH
MENU:
ENGLISH
AUDIO:
FRENCH
SUBTITLE:
SPANISH
PORTUGUESE
5
Press X/x to select a language.
The player uses the language selected
here to display the menu and subtitles as
well.
6
Press ENTER.
The Setup Display for selecting the
aspect ratio of the TV to be connected
appears.
SCREEN SETUP
TV TYPE:
4:3 LETTER BOX
4:3 LETTER BOX
SCREEN SAVER:
BACKGROUND:
4:3 PAN SCAN
BLACK LEVEL:
16:9
BLACK LEVEL
:
ON
(COMPONENT OUT)
7
Press X/x to select the setting that
matches your TV type.
◆ If you have a 4:3 standard TV
• 4:3 LETTER BOX or 4:3 PAN SCAN
(page 51)
◆ If you have a wide-screen TV or a 4:3
standard TV with a wide-screen mode
• 16:9 (page 51)
8
Press ENTER.
The Setup Display for selecting the type
of jack used to connect your amplifier
(receiver) appears.
,continued
23
Connecting to an AV amplifier (receiver) with a digital input jack having
D
a Dolby Digital or DTS decoder and 6 speakers
This connection will allow you to use the Dolby Digital or DTS decoder function of your AV
amplifier (receiver).
CD/DVD player
DIGITAL OUT
LINE OUT
S VIDEO
OUT
PCM/DTS/
DOLBY DIGITAL
COAXIAL
R-AUDIO-L
VIDEO
to DIGITAL OUT
(COAXIAL)
Coaxial digital cord
(not supplied)
to coaxial digital input
[Speakers]
a decoder
Rear (L)
Subwoofer
Rear (R)
l: Signal flow
Note
After you have completed the connection, be sure to
set "DOLBY DIGITAL" to "DOLBY DIGITAL"
and "DTS" to "ON" (page 23) in Quick Setup.
22
Is this player connected to an amplifier
(receiver) ? Select the type of jack you
are using.
YES
LINE OUTPUT L/R (AUDIO)
DIGITAL OUTPUT
NO
9
Press X/x to select the type of jack
(if any) you are using to connect to
an amplifier (receiver), then press
ENTER.
Choose the item that matches the audio
connection you selected on pages 19 to
22 (
through
).
D
A
A
• If you connect just a TV and nothing
else, select "NO." Quick Setup is
finished and connections are complete.
B-1
C-1
• Select "LINE OUTPUT L/R
(AUDIO)." Quick Setup is finished and
connections are complete.
B-2
C-2
D
• Select "DIGITAL OUTPUT." The Setup
Display for "DOLBY DIGITAL" appears.
10
Press X/x to select the type of
Dolby Digital signal you wish to
send to your amplifier (receiver).
Choose the signal that matches the audio
connection you selected on pages 20 to
22 (
through
).
B
D
AUDIO SETUP
AUDIO ATT:
AUDIO DRC:
STANDARD
DOWNMIX:
DOLBY SURROUND
DIGITAL OUT:
DOLBY DIGITAL:
DTS:
DOLBY DIGITAL
B-2
C-2
• D-PCM (page 54)
D
• DOLBY DIGITAL (only if the
amplifier (receiver) has a Dolby Digital
decoder) (page 54)
11
Press ENTER.
24
1-5
COMPONENT VIDEO OUT
Y
P
B
P
R
D
DIGITAL OUT
PCM/DTS/
DOLBY DIGITAL
COAXIAL
[Speakers]
AV amplifier (receiver) having
Front (L)
Front (R)
"DTS" is selected.
AUDIO SETUP
AUDIO ATT:
AUDIO DRC:
STANDARD
DOWNMIX:
DOLBY SURROUND
DIGITAL OUT:
DOLBY DIGITAL:
DTS:
12
Press X/x to select whether or
not you wish to send a DTS signal
to your amplifier (receiver).
Choose the item that matches the audio
connection you selected on pages 20 to
22 (
through
).
B
D
B-2
C-2
• OFF (page 54)
D
• ON (only if the amplifier (receiver) has
a DTS decoder) (page 54)
13
Press ENTER.
Quick Setup is finished. All connections
and setup operations are complete.
Enjoying the surround sound
effects
To enjoy the surround sound effects of this
player or your amplifier (receiver), set the
following items as described below for the
audio connection you selected on pages 20 to
22 (
through
). Each of these is the
B
D
default setting and does not need to be
OFF
adjusted when you first connect the player.
Refer to page 49 for using the Setup Display.
ON
D-PCM
Audio Connection (pages 19 to 22)
D-PCM
A
• No additional settings are needed.
B-1
C-1
• Set "DOWNMIX" to "DOLBY
SURROUND" (page 54)
• If the sound distorts even when the volume
is turned down, set "AUDIO ATT" to "ON"
(page 53)
B-2
C-2
D
• Set "DOWNMIX" to "DOLBY
SURROUND" (page 54)
• Set "DIGITAL OUT" to "ON" (page 54)
Center
OFF
ON
D-PCM
OFF
OFF
ON
Advertisement
Table of Contents
Troubleshooting
