Table of Contents
Advertisement
! Wireless Tx Errors
! Total: Displays the total number of errors that occurred
whereby frames were discarded or transmissions where aborted
or unacknowledged for various reasons. Additional fields display
counters for the number of errors due to specific reasons.
! H/W: The number of errors due to internal hardware problems
in the modem.
! ABR: The number of errors due to aborting the transmission
before completion because of internal problems in the DSP.
! CSL: The number of errors due to canceling the transmission
because the modem was occupied receiving data.
! ACKTOUT: The number of errors due to an acknowledge
timeout, where a frame remained unacknowledged past the time
defined in the Acknowledge Delay Limit parameter.
! FAIL: The number of errors due to internal timeouts in the
modem.
! ACKCRC: The number of errors due to a CRC error in the ACK
message.
! RTSC: The number of errors due to an RTS collision where the
RTS was sent, and the CTS was not received.
! EOD: The number of errors due to an End of Dwell, where not
enough time is left to transmit the message
! Submitted Frames (Bridge)
! Total: Displays the total number of data and RTP frames
submitted to the bridge for transmission to the wireless media.
This statistic does not include internally generated control or
wireless management frames or retransmissions.
! High Queue: Displays the number of frames sent to the bridge
and routed to the highest priority queue.
! Mid Queue: Displays the number of frames sent to the bridge
and routed to the medium priority queue.
! Low Queue: Displays the number of frames sent to the bridge
and routed to the lowest priority queue.
! ACSE Voice: Displays the number of ACSE voice frames sent to
the bridge for transmission to the wireless media. This statistic
is only applicable if the ACSE Option is set to Enable.
! Dropped Frames
! Total Dropped: Displays the total number of frames that were
dropped after being retransmitted to the extent of the maximum
permitted number of retransmissions.
! Dropped %: Displays the number of dropped frames as a
percentage of the total transmitted frames.
Wireless Status Monitor
C
4
HAPTER
4-7
Advertisement
Table of Contents
