Canon imagePROGRAF TZ-30000 Setup Manual page 7

6
Rotate the protective material
remove it.
8
Close the inner cover.
10
Connect the power cord to the printer.
●
Insert the power cord into the power connector on the rear of
the printer.
12
When the language selection screen appears on the
touch screen, select and gently tap a language with
your finger. Then, if the screen for selecting a time zone
appears, select and tap your region.
in the A direction to
A
5
7
Move the carriage in the direction of the arrow and
remove the protective material
9
Close the top cover.
11
Plug the power cord into the outlet, and then turn on the
printer.
13
When a message prompting you to start the setup
appears on the touch screen, tap OK.
.