Lennox LI018CI-180P432 Service Manual page 67

4. Remove electric box cover 2 and detecting plate(WIFI)
Remove the screws on the electric box
cover 2 and detecting plate(WIFI), then
remove the electric box cover 2 and
detecting plate(WIFI).
Loosen the connection clasps between
front case sub-assy and bottom case.
Lift up the front case sub-assy and take
it out.
Screw off the screws that are locking
the swing motor and take the motor off.
64
Electric box cover 2
Screw
Screws
Detecting plate
(WIFI)
Installation and Maintenance
Service Manual
S wing motor