How To Add Fluid; Manual Transmission Fluid; When To Check - Chevrolet 1997 Camaro Owner's Manual

How to Add Fluid
Refer to the Maintenance Schedule to determine what
kind of transmission fluid to use. See "Recommended
Fluids and Lubricants" in the Index.
Add fluid only after checking the transmission fluid
HOT. (A COLD check is used only as a reference.) If the
fluid level is low, add only enough of the proper fluid to
bring the level up to the HOT area for a hot check. It
doesn't take much fluid, generally less than one pint
(0.5 L). Don't ove ZZ. We recommend you use only fluid
labeled DEXRON -111, because fluid with that label is
made especially for your automatic transmission. Damage
caused by fluid other than DEXRON-I11 is not covered
by your new vehicle warranty.
% !
After adding fluid, recheck the fluid level as
When the correct fluid level is obtained, push the
described under "How to Check."
dipstick back in all the way.
Manual Transmission Fluid
When to Check
A good time to have it checked is when the engine oil is
changed. However, the fluid in your manual
transmission doesn't require changing.
How to Check
Because this operation can be difficult, you may
choose to have this done at your Chevrolet dealership
Service Department.
If you do it yourself, be sure to follow all the
instructions here, or you could get a false reading.
NOTICE:
Too much or too little fluid can damage your
transmission. Too much can mean that some of
the fluid could come out and fail on hot engine
parts or exhaust system parts, starting a fire. Be
sure to get an accurate reading if you check your
transmission fluid.
6-25