Table of Contents
Advertisement
Removing an Add-in Card
!
Before opening the system unit, save any open files, exit Windows, turn off
the power of the computer and all attached peripherals, and then unplug the
power cord.
1
Remove the left side panel (see
page
22).
2
Remove the bottom panel (see
page 23).
3
Disconnect any cables attached to the add-in card.
4
Remove the screw that secures the add-in card to the chassis.
5
Remove the add-in card from the PCI slot connector and store the
card in an anti-static wrapper for future use.
Grasp the card with one hand on each end, and gently pull up as you rock the card
from side to side.
Removing, Installing, and Replacing Components
"Removing the Bottom Panel"
"Removing the Left Side Panel" on
29
on
KY0071.VSD
Advertisement
Table of Contents
