Sony SMP-U10 Operating Instructions Manual page 27

◆ AUDIO (HDMI)
Selects the type of audio signal output from
the HDMI OUT jack.
AUTO Normally, select this. Outputs
audio signals according to the
"DIGITAL OUT" settings
(page 25).
PCM Converts Dolby Digital or
96 kHz/24 bit PCM signals to
48 kHz/16 bit PCM.
b
A loud noise (or no sound) will be output if you
connect the player to a TV that is not compatible
with DOLBY DIGITAL signals and "AUTO" is
selected. In this case, select "PCM."
◆ CONTROL FOR HDMI
Switches the Control For HDMI setting on or
off.
ON Allows you to use the
CONTROL FOR HDMI
features (page 10).
OFF
Switches this function off.
◆ LANGUAGE FOLLOW
Switches the languages of this player to that
of the current TV OSD language.
You cannot select this when "CONTROL
FOR HDMI" is set to "OFF."
ON Switches this function on.
OFF
Switches this function off.
b
• Turn off any display before using this function.
• The OSD language for the player is maintained if
the TV's language cannot be supported.
US
27