Cadillac 2005 XLR Owner's Manual page 266

Position Commands
Current Position, Current Location, Show Current
Position, Show Current Location: These commands
will cause the system to display the vehicle's current
location on the map screen.
Map: This command will cause the system to display
the map screen.
Map Commands
Zoom In: This command will cause the system to zoom
in when on the map screen.
Zoom Out: This command will cause the system to
zoom out when on the map screen.
Maximum Scale: This command will cause the system
to zoom out to the maximum available map scale
when on the map screen.
Minimum Scale: This command will cause the system
to zoom in to the minimum available map scale when
on the map screen.
Heading Up, Change to Heading Up: These
commands will cause the system to display the Vehicle
Up heading when on the map screen. The map scale
should be set for under 2 miles (4 km).
4-72
North Up, Change to North Up: These commands will
cause the system to display the North Up heading
when on the map screen if the map scale is set
to 2 miles (4 km) or less.
Map Direction, Change Map Direction: These
commands will cause the system to change the vehicle's
direction from North Up to Heading Up or Heading Up
to North Up on the map screen if the map scale is set to
2 miles (4 km) or less.
Mark, Mark This Point: These commands will cause
the system to mark the location as a memory point while
on the map screen.
Destination Commands
Home, Go Home: These commands will cause the
system to enter the Home destination, if one is set.
Go To Starting Point, Previous Starting Point: These
commands will cause the system to enter the last
available starting point as a destination.