Vehicle Personalization - Cadillac 2004 Seville Owner's Manual

Vehicle Personalization

Memory Seat, Mirrors and Steering
Wheel
These buttons are used to program and recall memory
settings for the driver's seating, steering wheel and
outside rearview mirror positions.
2-52
If your vehicle has this
feature, the controls are
located on the driver's
door panel.
Use the following steps to program each button:
1. Adjust the driver's seat, including the seatback
recliner and lumbar, both outside mirrors and
the steering wheel to a comfortable position.
2. Press the MEMORY SET button. Release the
MEMORY SET button when you hear a single beep.
3. Within five seconds, press button 1 for Driver 1. A
single beep will sound through the driver's side
front speaker to let you know that the positions have
been stored.
A second mirror, seating and steering wheel position
can be programmed by repeating the above steps and
pressing button 2 (for Driver 2). Each time a memory
button is pressed, a single beep will sound. Each
time button 1 or 2 is pressed and released while the
vehicle is in PARK (P), the memory positions will
be recalled. If the vehicle is not in PARK (P), the
memory buttons must be pressed and held to recall the
stored positions.