Table of Contents
Advertisement
Remote Control
Problem
Remote control does not
operate
Cannot change channels with
the remote control
Remote control does not
operate non-Sony video
equipment
Remote control does not
operate Sony video equipment
Memory Stick
Problem
Image does not display/Cannot
see all files
JPEG image displays
undesirable motion or flicker in
full screen
Rotation not saved after
Memory Stick is ejected or
Memory Stick Viewer is closed
116
Possible Remedies
s
The batteries could be weak. Replace the batteries.
s
Check the orientation of the batteries.
s
FUNCTION
Press
repeatedly until the TV indicator lights up. You may have
inadvertently pressed FUNCTION, which changes the remote control to SAT or
CABLE mode.
s
Make sure this unit's power cord is connected securely to the wall outlet.
s
Locate the unit at least 3-4 feet away from fluorescent lights.
s
If you are using the TV to change channels, first press
until the TV indicator lights up.
s
If you are using another device to change channels, be sure you have not
inadvertently switched your TV from the channel 3 or 4 setting. Use the
Fix
option to "fix" the channel based on the hookup you used (see page 103).
s
If you are using another device to change channels, be sure to press
for that device. For example, if you are using your cable box to change channels,
FUNCTION
be sure to press
s
If you replaced the batteries to the remote recently, the code numbers for the video
equipment may need to be reset.
s
There may be more than one code for the equipment that you are attempting to
operate.
s
There is a possibility that some non-Sony equipment cannot be operated by your
Sony TV remote.You may need to use the equipment's original remote control.
s
There is a possibility that some Sony equipment cannot be operated by your Sony
TV remote.You may need to use the equipment's original remote control.
Possible Remedies
s
Make sure the image file is a JPEG (.jpg, .jpeg) file or an MPEG1 (.mpg, mpeg)
file.
s
Make sure the Memory Stick is inserted properly (see page 73).
s
Check the
Filter
option setting (see page 84).
s
Check the
Select Contents
Digital Camera Folders
DCF directories if
currently selected folder if
s
The maximum number of files the Memory Stick Viewer can display is 1,024.
s
JPEGs captured using a digital video camera may appear to display motion in full
screen. This is a result of the way digital video cameras record still images, and is
not a result of a malfunction with the TV.
s
The Memory Stick might be locked. Unlock the Memory Stick and try rotating the
image again.
s
The file might not have information (EXIF data) that is usually generated when a
digital camera records a photo. In this case, it is not possible to save the rotation.
s
There might be insufficient space on the Memory Stick to save the rotated file. Try
deleting one or more files and rotating the image again.
repeatedly until the SAT/CABLE indicator lights up.
setting (see page 84) and ensure that files are either in
is selected (see page 84), or in the
Select a Folder
is selected (see page 84).
FUNCTION
repeatedly
Channel
FUNCTION
Advertisement
Table of Contents
