Marine Mount
Instructions
WARNING
See the Important Safety and Product
Information guide in the GPS device
product box for product warnings and
other important information.
Garmin
strongly recommends having an
®
experienced installer with the proper
knowledge of electrical systems install the
ms install the
ms install the
device. Incorrectly wiring the power cable
he power cable
he power cable
can result in damage to the vehicle or the
the vehicle or the
the vehicle or the
battery and can cause bodily injury.
se bodily injury.
dily injury.
CAUTION
CAUTION
Always wear safety goggles, ear
safety goggles, e
safety goggles, ear
protection, and a dust mask when drilling,
a dust mask whe
a dust mask wh
cutting, or sanding.
NOTICE
CE
The metal contacts on the GPS device
and the mount should be kept dry to avoid
equipment damage. Use the weather cap
on the mount at all times when the unit is
not mounted to keep the metal contacts
dry and protected.
To obtain the best performance and to
avoid damage to your boat, install the
device according to these instructions.
Read all installation instructions before
all
all
proceeding with the installation. If you
ng with th
ng wi
experience difficulty during the installation,
ience diff
ience difficulty d
contact Garmin Product Support.
ntact
ntact
Garmin Product
min Pr
Tools Needed
Tools Needed
Tools Needed
• Drill
• Drill
• Drill
• Phillips sc
• Phillips screwdriver
Phil
ng an
an
3
• 9.5 mm (
• 9.5 mm
• 9.5 m
/
oper
8
• 3 b
• 3 bolts or 3 screws:
3 b
◦ #8 (4 mm) pan-head machine bolts
with nuts and washers, and a
5 mm (
◦ #8 (4 mm) pan-head self-tapping
screws and a 1.5 mm (
bit
Mounting Considerations
The swivel base must be mounted using
pan-head machine bolts or self-tapping
screws. Using screws with countersunk
heads can damage the mounting bracket.
in.) wrench or socket
1
/
in.) drill bit
16
1
/
in.) drill
16
NOTICE