HP t610 Series Hardware Reference Manual page 33

Table A-1 HP t610 Thin Client (continued)
Rated Output Current (maximum)
Output Voltage
Table A-2 HP t610 PLUS Thin Client
Dimensions
Width (front to back)
Height (top to bottom, without stand)
Depth (side to side)
Approximate Weight
Temperature Range (fanless design)*
Operating**
(max. rate of change is 10° C per hour or 18° F per hour)
Nonoperating
(max. rate of change is 20° C per hour or 36° F per hour)
*Specifications are at sea level with altitude derating of
1° C/300m (1.8° F/1000ft) to a maximum of 3km
(10,000ft), with no direct, sustained sunlight. Upper limit
may be limited by the type and number of options installed.
Relative Humidity (non-condensing)
Operating
(max. wet bulb temperature is 28° C or 84.2° F)
Nonoperating
(max. wet bulb temperature is 38.7° C or 101.6° F)
Maximum Altitude (unpressurized)
Operating
(max. allowed rate of change is 457 m per minute or 1500
ft per minute)
Nonoperating
(max. allowed rate of change is 45 7m per minute or 1500
ft per minute)
Power Supply
Operating Input Voltage Range
Rated Line Frequency
Power Output (maximum)
3.33 A
+19.5 V DC
220 mm
240 mm
65 mm
1.53 kg
10° to 40° C
-30° to 60° C
** The operating temperature range when the thin
client is attached to a flat panel using the HP Quick
Release is 50° to 95° F (10° to 35° C).
10–90%
5–95%
3048 m
9,144 m
100–240 VAC
50–60 Hz
85 W
3.33 A
+19.5 V DC
8.66 in.
9.45 in
2.56 in.
3.37 lb
50° to 104° F
-22° to 140° F
10–90%
5–95%
10,000 ft
30,000 ft
100–240 VAC
50–60 Hz
85 W
27