Sony BRAVIA KDL-40EX640 Operating Instructions Manual page 55

• Normal in the 4:3 Default setting is not available when you are watching a 720p, 1080i or 1080p
source.
• If 4:3 Default is set to anything but Off, the Wide Mode setting changes only for the current
channel. When you change channels (or inputs), Wide Mode is automatically replaced with the
4:3 Default setting for 4:3 sources. To retain the current Wide Mode setting as channels and
inputs are changed, set 4:3 Default to Off.
• 4:3 Default is not available if Auto Wide is set to Off.
Option Description
PC Settings When a PC is connected to the TV and the PC input is selected, the PC
settings screen appears instead of the Screen settings.
You can also select the PIP feature which allows you to view two pictures
simultaneously from OPTIONS button (page 31).
Wide Mode Normal
Reset
Auto
Adjustment
Phase
Pitch
Horizontal
Center
Vertical
Center
• For the PC Input Signal Reference Chart, see page 67.
• Auto Adjustment, Phase and Pitch are not available with PC signal connected to HDMI input.
Select to display in the original image size.
Full 1 Select to enlarge the picture to fill the display area,
keeping its original aspect ratio.
Full 2 Select to enlarge the picture to fill the display area.
Resets all PC settings to the default values.
Select to automatically adjust the display position and phase of
the picture when the TV receives an input signal from the
connected PC. Note that Auto Adjustment may not work well
with certain input signals. In such cases, manually adjust the
options below.
Adjust after Pitch to fine tune overall sharpness.
Adjust uneven sharpness on screen.
Allows you to move the position of the picture left and right.
Allows you to move the position of the picture up and down.
55