Sony BRAVIA KDL-40EX640 Operating Instructions Manual page 42

Type 1: Secured network
with Wi-Fi Protected Setup™
(WPS)
The WPS standard makes security of a
wireless home network as straightforward
as pressing the WPS button on the
wireless LAN router. Before setting up a
wireless LAN, check the location of the
WPS button on the router and verify how
to use it.
For security purpose, WPS (PIN) provides
a PIN code for your router. PIN code is
renewed every time you select WPS
(PIN).
1
Press HOME, then select Settings >
Setup > Network > Network Setup.
2
IP Address setting/Proxy server:
– automatic setting:
Setup network connection > Auto
– manual setting:
Setup network connection >
Custom > Wireless Setup
3
Select WPS (Push Button) for Push
Button method or WPS (PIN) for PIN
method.
• Button name of the WPS may differ
depending on the router (e.g. AOSS button).
4
Follow the instructions on the set-up
screen.
42
Type 2: Secured network
without Wi-Fi Protected
Setup™ (WPS)
To set up a wireless LAN, SSID (wireless
network name) and security key (WEP or
WPA key) will be required. If you do not
know them, consult the instruction manual
of your router.
1
Press HOME, then select Settings >
Setup> Network > Network Setup.
2
IP Address setting/Proxy server:
– automatic setting:
Setup network connection > Auto
– manual setting:
Setup network connection >
Custom > Wireless Setup
3
Select Scan, then select a network
from the list of scanned wireless
networks.
4
Follow the instructions on the set-up
screen.
• If you use WPS for network set-up, the
security settings of the wireless LAN router
activate, and any equipment previously
connected to the wireless LAN in a non-
secure status will be disconnected from the
network.
In this case, activate the security settings of
the disconnected equipment and then
reconnect. Or, you can deactivate the
security settings of the wireless LAN router,
and then connect the equipment to a TV in a
non-secure status.