Summary: Adding Products To Your Order - Symbol Keychain Barcode Scanner User Manual

Summary: Adding Products to Your Order

To add products to your Order / Order Form:
1. Print a list of Barcode Labels if necessary. For more information see the Online Help.
2. Simply point and click to scan the desired item codes and quantities. Aim the
scanner at the desired barcode from a product list or shelf label. Press and hold the
large button on the scanner until you hear the tone and the blinking indicator turns
solid green.
N : Make sure the scanner beam covers the entire barcode and extends as far out
OTE
as indicated by the endpoints of the barcode. The scanner should be held
approximately 2.5 inches from the barcode and at a slight angle.
3. Connect the scanner to the computer using a USB or Serial cable. If using the USB
Connector, you must install the USB driver from the enclosed CD. See the Setup
Instructions enclosed with your scanner.
4. If using the Web Site (see Using the Scanner with Web Site):
a. Login by entering your User ID and Password.
b. Go to the My Account Page.
c. Click Keychain Barcode Scanner.
d. Click Enable Scanner.
e. Click Upload Scannned Items.
f. The scanned items are automatically added to your order page.
5. If using Ar A eZ (see Using the Scanner with A
UB
a. Login by entering your User Name and Password.
b. From the Tools Menu, click System Setup.
c. Click the Enable Barcode Device button.
d. Click the Upload Scanned Items to Order button
e. The scanned items are automatically added to the Order Form.
6. Review and submit your order.
Keychain Barcode Scanner User Guide
A eZ):
RUB
on the Order Form.
Page 7