Advertisement
The battery ratings (CCA) displayed on the tester must be identical to the ratings marked on battery label.
6. To conduct starter test, press ENTER.
BATTERY TEST RESULTS
RESULT ON PRINTER
Good recharge
Charge & Retest
Replace battery
Bad cell-replace
Whenever filing a claim for battery, the print out of the battery test results must be attached.
STARTER TEST PROCEDURE
1. After the battery test, press ENTER immediately for the starter test.
Good battery
No action is required
Battery is in a good state
Recharge the battery and use
Battery is not charged properly
=> Charge and test the battery again (Failure to charge
the battery fully may read incorrect measurement value)
=> Replace battery and recheck the charging system.
(Improper connection between battery and vehicle cables
may cause "REPLACE BATTERY", retest the battery
after removing cables and connecting the tester to the
battery terminal directly prior to replacing the battery)
=> Charge and retest the battery. And then, test results
may cause "REPLACE BATTERY", replace battery and
recheck the charging system
REMEDY
Advertisement
