Setting The Beep Sound (Beep) - Sony RM-NX7000 Operating Instructions Manual

Setting the beep sound (BEEP)

The Remote Commander is set at the factory for the key-touch confirmation
beep to sound when you press a display key or a button on the Remote
Commander. You can set the key-touch confirmation beep not to sound.
Press the [SET] key for 2 seconds or longer in the
1
Home display.
The Set display appears.
Press the [SYSTEM] key.
2
The System display appears.
Press the [BEEP] key.
3
Press the [ON] or [OFF] key.
4
The selected key is bordered.
The default setting is [ON].
[ON]: To turn on the key-touch beep.
[OFF]:
To turn off the key-touch beep.
Press the [OK] key.
5
The setting of the beep is complete, and the display returns to step 3.
z Tip
A beep sounds in the setting mode to confirm the setting operation, even if you set
the beep to OFF. Also the 'OK' beep sounds (once), or the 'NG' beep warning
sounds (twice, three times or five times).
To finish all settings, press the COMMANDER OFF
6
button for 2 seconds or longer.
The display returns to the Home display. Or press the [EXIT] key
repeatedly until the Home display is shown.
222