ENGLISH (Original instructions) SPECIFICATIONS Model: DMP181 Overall length with BL1815N 297 mm with BL1860B 316 mm Maximum air pressure 1,110 kPa 10 minutes On / 5 minutes Off Duty cycle Rated voltage D.C. 18 V Net weight 2.5 - 2.8 kg •...
Save all warnings and instruc- Wear ear protection. WARNING: tions for future reference. The noise emission during actual WARNING: The term “power tool” in the warnings refers to your use of the power tool can differ from the declared mains-operated (corded) power tool or battery-operated value(s) depending on the ways in which the (cordless) power tool.
Page 6
Prevent unintentional starting. Ensure the Disconnect the plug from the power source switch is in the off-position before connecting and/or remove the battery pack, if detachable, to power source and/or battery pack, picking from the power tool before making any adjust- up or carrying the tool.
Page 7
Otherwise, the object, 22. Use only standard accessories provided hose, air chuck, or adapter may be damaged and by Makita. The use of any other accessories you may be injured. or attachments might present a risk of injury to Release air pressure slowly.
If not, causing fires, personal injury and damage. It will it may accidentally fall out of the tool, causing injury to also void the Makita warranty for the Makita tool and you or someone around you. charger.
Indicating the remaining battery Main power switch capacity Always turn off the main power WARNING: switch when not in use. Only for battery cartridges with the indicator ► Fig.2: 1. Indicator lamps 2. Check button Press the check button on the battery cartridge to indi- When carrying the tool, turn off the CAUTION: cate the remaining battery capacity.
Setting the target pressure value Storing hose Press the [M] button, and select the pressure value unit. The hose can be attached to the hose holder of the tool. The pressure value unit is changed each time you press ► Fig.8: 1. Hose holder 2. Hose the [M] button.
Keep pulling the switch trigger until the tool stops. repairs, any other maintenance or adjustment should The tire is inflated with the specified pressure. be performed by Makita Authorized or Factory Service Centers, always using Makita replacement parts. Remove the air chuck and Presta valve adapter, and then tighten the locking nut.