Sony PRS-T1 User Guide (Printable Version) User Manual page 22

Case C
Connecting to a Wi-Fi router without WPS support
Case D
Connecting to an available Wi-Fi network
Manual setup
Set up a Wi-Fi network connection manually; connect to an access point for which the SSID is
set to be invisible. See Details.
Case A: A WPS-compatible Wi-Fi router with WPS button
The Reader is compatible with WPS (Wi-Fi Protected Setup), which lets you easily make a Wi-Fi
connection using the "WPS" or "Connect" button on your WPS-compatible Wi-Fi router. Make
sure to turn on [Wi-Fi] and tap [Wi-Fi Settings] on the [Wireless Network Settings] screen.
Alternatively, you can turn on [Wi-Fi] by tapping the status bar and tapping [Wi-Fi Settings].
1. Tap [WPS Push-Button Configuration]
2. On your Wi-Fi router, press the "WPS" or "Connect" button within 2 minutes.*
The Reader automatically attempts to establish a Wi-Fi connection.
* The name of the button on your Wi-Fi router may vary.
"WPS" or "Connect" button
3. After the Reader screen shows the setup completion, tap [OK].
Details
Details
[Start ].