Table of Contents
Advertisement
The windshield washer fluid reservoir is located by the
coolant recovery tank on the driver's side of the engine
compartment. See "Engine Compartment Overview" in
the Index for more information on location.
Open the cap labeled WASHER FLUID ONLY.
Add washer fluid until the tank is full.
NOTICE:
D
When using concentrated washer fluid,
follow the manufacturer's instructions for
adding water.
D
Don't mix water with ready
fluid. Water can cause the solution to freeze
and damage your washer fluid tank and
other parts of the washer system. Also,
water doesn't clean as well as washer fluid.
D
Fill your washer fluid tank only
-
three
quarters full when it's very cold.
This allows for expansion if freezing occurs,
which could damage the tank if it is
completely full.
D
Don't use engine coolant (antifreeze) in
your windshield washer. It can damage
your washer system and paint.
-
-
to
use washer
6-29
Advertisement
Chapters
Table of Contents
