ANPR LUMO | QUICK REFERENCE GUIDE SAFETY PRECAUTIONS The following safety precautions must be observed during normal use, service and repair. The ANPR shall be connected to safety ground. Disconnect the power supply before removing any parts. The ANPR shall only be installed and serviced by qualified and trained personnel.
ANPR LUMO | QUICK REFERENCE GUIDE CONNECTIONS Ethernet connection The Ethernet communication cable (Cat5e, 5 meter) is already fitted to the RJ-45 network connector. Multi-wire cable Power supply Power supply +24VDC ~ 1A Blue Ground 0V Black Ground 0V Rs485 connection...
Page 5
ANPR LUMO | QUICK REFERENCE GUIDE CONFIGURE THE ANPR By default the camera’s exposure settings are pre-configured to suit most situations, The following items needs to be configured after installation. Region of interest Output messages (actions) Drive the vehicle into the position where it should be possible to read it's license plate. Connect to the ANPR using your web browser and login.
Page 6
ANPR LUMO | QUICK REFERENCE GUIDE ACTIONS In the actions menu, you can define what actions the camera should perform on certain events. There are three types of events based on the OCR system: READ When ANPR recognizes a plate...