Preparing A Power Source; Installing The Battery - Sony mylo com-1 Operating Instructions Manual

18
18
Getting Started

Preparing a Power Source

Make sure that the battery is inserted before using the unit.

Installing the battery


Open the battery compartment cover by placing your thumb
or finger on the word "Open" on one end of the cover and
pressing towards the other end of the cover.

Insert the battery, label side up, aligning the metal contacts on
the battery with the contacts inside the battery compartment.

Slide the battery compartment cover onto the back of the unit
until it clicks into place.
Notes
• Turn off the unit before replacing the battery. Removing the battery while the unit is
turned on may damage data in the unit and cause a malfunction.
• Be sure the battery is inserted when the unit is in use. Using the unit without the battery
is neither recommended nor supported.
• Do not use any other type of battery in your unit.

Continued