Heated Seats; Active Seat Ventilation - BMW 2010 528 Owner's Manual

Heated seats*

Front
The appearance and arrangement of the but-
tons may vary depending on the equipment.
1 Seat heating, three LEDs
2 Seat heating, one LED
3 Seat heating with active seat ventilation
Press the respective button once per tempera-
ture level. The temperature level is shown on
the Control Display with buttons 2 and 3. The
maximum temperature is supplied when three
LEDs are lit.
The temperature is reduced and if need be, the
heating is switched off in order to reduce the
load on the battery. The LEDs remain lit.
To switch off: Press button longer.
Temperature distribution without

active seat ventilation

The heat output can be distributed variously in
the seat cushion and the backrest.
iDrive, for operating principle refer to page 16.
1. "Settings"
2. "Climate"
Online Edition for Part no. 01 41 2 602 678 - © 08/09 BMW AG Online Edition for Part no. 01 41 2 602 678 - © 08/09 BMW AG
3. "Seat heating distribution"
4. Turn the controller to adjust the distribu-
tion.
The setting is applied.
Temperature distribution with active
seat ventilation
The heat output can be distributed variously in
the seat cushion and the backrest.
iDrive, for operating principle refer to page 16.
1. "Settings"
2. "Climate"
3. "Seat heating distribution"
*
4. Turn the controller to adjust the distribu-
tion.
The setting is applied.
49