Settings And Information - BMW 2008 1 Series Owner's Manual

Settings and information

Operating principle
1 Button for:
> Selecting display
> Setting values
2 Button for:
> Confirming selected display or set val-
ues
> Calling up computer information
3
When the lights are on: instrument lighting
brightness 94
4 Calling up Check Control
Units of measure
You can set units of measure.
Adjusting the units of measure
iDrive, for operating principle refer to page 16.
1. Open the start menu.
2. Press the controller to open the menu.
3. Select "Settings" and press the controller.
70
Online Edition for Part no. 01 41 0 014 691 - © 11/07 BMW AG
5
6
7
8
Exiting displays
The outside-temperature reading and the time
67
reappear when you press button 2 or if you
make no entries within approx. 15 seconds. If
required, complete the current setting first.
76
4.
5.
Checking engine oil level
Setting the time 74
Setting the date 75
Viewing service requirement display
Select "Language / Units" and press the
controller.
If necessary, move the highlight marker to
the uppermost field. Turn the controller
*
210
71